Kurs Detayları
|
CCIESANLAB Eğitimi (CCIE Storage Lab BootCamp)
-
35
Saat
/
5
Gün
|
|
The CCIE SAN Lab BootCamp is an intensive 5-day hands-on experience that will prepare you to take and pass the Cisco CCIE Storage Networking Lab Exam.
Through a series of challenging lab workshops and analysis, you will become intimately familiar with the format and the demands of the CCIE Lab Exam. You'll learn what to expect, how to prepare, and how to master the unique challenges of this rigorous exam.
- Day 1 will begin with an introduction to the CCIE Storage Networking Lab Exam blueprint. You will learn what to expect to see on the exam and in the Cisco CCIE SAN lab itself. Our CCIE-certified instructors will also provide you with tips for preparing for the exam and for surviving and succeeding on the day of your exam.
- You will spend the remainder of Day 1 and Days 2 and 3 working on your first practice exam. After each task, your instructor will help you analyze your performance and identify areas for improvement. You will then review the key configuration procedures, validation steps, best practices, and common errors for each task.
- On Days 4 and 5, you will be asked to attempt two more complete practice exams, start-to-finish. You'll spend the late afternoon and early evening analyzing your results.
The challenge labs in this class are designed to prepare you for the actual exam and are therefore 8 hours in duration which means this class will run into the evening to ensure you get the full exam experience.
|
|
|
|
Sınav:N/A
|
|
|
|
Course Objectives
After completing this training course the student will be able to:
- Create VSANs to implement a SAN design
- Configure Fibre Channel interfaces to implement a SAN design
- Configure advanced fabric services, including Cisco Fabric Services, DDAS, and enhanced zoning to optimize fabric management processes
- Configure zoning
- Implement IVR to allow selective routing of flows between VSANs
- Secure the SAN environment with port and fabric security
- Configure secure management protocols and role-based access control
- Configure FCIP tunnels
- Optimize performance across the FCIP tunnel
- Implement connectivity from iSCSI hosts to Fibre Channel storage targets
- Enable iSCSI high-availability and security
- Configure iSLB to enhance the scalability of iSCSI
- Implement FCC and QoS to reduce congestion and prioritize traffic flows
- Configure FICON support
- Configure Call Home to provide fault notification services
- Set up SPAN sessions, fcanalyzer, and Wireshark to capture FC protocol data
- Install software licenses
- Upgrade system software
Intended Audience
This course is intended for students who have already passed the CCIE Written Exam and are currently preparing for the CCIE Lab Exam.
Prerequisites
- Passing score on the CCIE Storage Written Examination, and
- CCIE Storage KickStart, and
- 1+ years hands-on experience with the MDS 9000 platform
Course Contents:
Preparing for the CCIE Storage Lab Exam
Configuring VSANs
Configuring Interfaces
Configuring FSPF
Implementing Zones
Implementing Inter-VSAN Routing
ACL, SSH, and RBAC
Implementing Port and Fabric Security
AAA Services and NTP
Configuring FCIP
Tuning FCIP Performance
iSCSI Configuration
iSCSI CHAP and Security Options
iSCSI Server Load Balancing
QoS and FCC
FICON Configuration
Using Call Home
SPAN and RSPAN
Installing and Licensing SAN-OS
Challenge Lab 1
- Fibre Channel Configuration
- IP Services Configuration
- FICON
Challenge Lab 2
- ISL and VSAN Configuration
- Zone Configuration
- Fibre Channel Address Management
- Security
- IP Services
- Quality of Service
- FICON
- Diagnostics
- Switch Management
Challenge Lab 3
- ISL and VSAN Configuration
- Zone Configuration
- Fibre Channel Address Management
- Security
- IP Services
- Quality of Service
- FICON
- Diagnostics
- Switch Management
Challenge Lab 4
- Switch Management
- ISL and VLAN Configuration
- Zone Configuration
- Fibre Channel Address Management
- Security
- IP Services
- Quality of Service
- FICON
- Diagnostics
|
|
|
|